Voice Control on the Raspberry Pi

Note: Updated version here:
http://stevenhickson.blogspot.com/2013/05/voice-command-v20-for-raspberry-pi.html

I'm finally releasing my Raspberry Pi voice control software.
The beauty of this is that you can use it and customize it without programming anything.
This will work on any linux machine but I find it uniquely suited for the Raspberry Pi and that's what I developed it for.
You just type voicecommand -e to edit the configuration file and add any speech and the coinciding command. You can see all of the little nifty commands it can recognize just with my config file in the video. I use all of these pretty often. It is very mutable and works with lots of other programs.

Watch this video to really get a feel for the program:

The commands should be in the format speech=command. Ex:
music=xterm -e pianobar
Doctor Who=playvideo -r -f Doctor Who

Unfortunately, it is caps sensitive voice control right now, but you can test the input by running
speech-recog.sh
on you machine to see what the speech recognition will give you. It uses Google's api and is really good at recognizing what you say. I used to use espeak instead of festival for the text to speech because of the speed difference. However, after some very helpful comments from people, I've switched to using Google's TTS api, which is much more pleasant to listen to. The video above is still using espeak but the newest code does not.

I hope you will try this out and make some cool things with it. Instructions to install are below.
I'm in the process of setting up a repository so until then, here are the instructions (do this in the terminal):

sudo apt-get install git-core

git clone git://github.com/StevenHickson/PiAUISuite.git

cd PiAUISuite/Install/
./InstallAUISuite.sh

Update Instructions 

cd PiAUISuite

git pull

cd Install

sudo ./UpdateAUISuite.sh

Here are the dependencies required to run and build:
sudo apt-get install libboost1.50-dev libboost-regex1.50-dev youtube-dl axel curl xterm libcurl4-gnutls-dev mpg123 flac sox

**Note: If the file .commands.conf doesn't exist in your home directory and you have an old version of code, the program will exit. You should either grab the newest code from github or create the file yourself.

**To make it listen for longer, edit the file /usr/bin/speech-recog.sh and change -f cd -t wav -d 3 to -f cd -t wav -d # where number is how many seconds it should listen.

Consider donating to further my tinkering

Places you can find me

• Facebook
• Google+
• Linkedin
• Blogspot
• Google-Code
• Github
• YouTube
• Twitter

Read More

Raspberry Pi Settlers of Catan Server

So a couple of days ago I decided I wanted my Pi to be a Settlers of Catan server.
I decided on using a custom compiled JSettlers version instead of the C++ pioneer version because of the extra perks it had.

It runs surprisingly well considering it is in java but it makes sense since it is making the client's computer do most of the work. I was also decently surprised with the bots. The server allows you to create practice games against bots or real games where other people can sign up to play with you.

It also has multiple scenarios and lots of documentation. Sometimes it is a little buggy but overall I'm pretty happy with it as of right now.

I've uploaded the version I have compiled and an install script. To run it, first you need to have java and apache (or some other web server) installed. If you don't, run:
sudo apt-get install apache2 openjdk-7-*

**Note, you don't need apache to run, you could use others such as NGinx or no web server at all and just play the game by yourself.

Then download the file, unzip it, and install:
wget "https://stevenhickson-code.googlecode.com/files/PiSettlers.tar.gz"
tar -xvf PiSettlers.tar.gz
cd JSettlers2
sudo ./install-web.sh

and now you should be done, you can go to your IP address in any computer on your network and play it.
Mine is at http://192.168.1.100/settlers/
**Note, if you want to play it outside of your network, i.e. you have a domain name, then you need to open port 8880 on your router to go to the pi.

Here is what it looks like playing a game hosted from the pi on my fedora laptop.

Consider donating to further my tinkering

Places you can find me

• Facebook
• Google+
• Linkedin
• Blogspot
• Google-Code
• Github
• YouTube
• Twitter

Read More

Password Protect Any Folder Without Any Software

In my previous post i have teach you to hide files behind images. In this tutorial i will show you interesting and usefull trick to password protect folder without using any software using batch file programming. This trick will work on all windows platform (Win XP, Win 7). Follow below tutorial to learn this trick.

How To Lock Folder ?

   1. Open Notepad and Copy code given below into it.

cls
@ECHO OFF
title coolhacking-tricks.blogspot.com
if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK
if NOT EXIST MyFolder goto MDMyFolder
:CONFIRM
echo Are you sure to lock this folder? (Y/N)
set/p "cho=>"
if %cho%==Y goto LOCK
if %cho%==y goto LOCK
if %cho%==n goto END
if %cho%==N goto END
echo Invalid choice.
goto CONFIRM
:LOCK
ren MyFolder "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
echo Folder locked
goto End
:UNLOCK
echo Enter password to Unlock Your Secure Folder
set/p "pass=>"
if NOT %pass%== coolhacks goto FAIL
attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" MyFolder
echo Folder Unlocked successfully
goto End
:FAIL
echo Invalid password
goto end
:MDMyFolder
md MyFolder
echo MyFolder created successfully
goto End
:End

   2. Save the notepad file as lock.bat (.bat is must)

   3. Now double click on lock.bat and a new folder will be created with name MyFolder

   4. Copy all your data you want to protect in that New folder

   5. Now double click on lock.bat and when command promp appears Type Y and press enter.

   6. Now MyFolder will be hidden from you view, to access that folde double click on lock.bat

   7. It will ask for password enter your password and done. (Default password is coolhacks)

• To change the password replace coolhacks with  new password in the above code

How To Further Secure ?

You might be thinking that anyone can access the password by opening that lock.bat file in Notepad or any other text editor. To make it more secure hide lock.bat in some secure location after following the above tutorial To access the secured file double click on lock.bat. I would suggest copying lock.bat file into Pendrive and copying it into your computer whenever you required to access to your protected files.

Few More Interesting Tricks

• Learn To Hide Files Behind The Images
• Learn To Make Dangerous Virus In A Minute
• Watch Star Wars Movie In CMD
• Finding Ip Address Of A Website Using Command Prompt

Read More

Using Youtube on the Raspberry Pi without XBMC or gnash

There is an update to this here.

You can install this by pulling the source from git and running the InstallAUISuite.sh file.
Commands to install are below (your user should have sudo priveledges but you don't need to sudo or be root to run the commands unless shown otherwise):

sudo apt-get install git-core

git clone git://github.com/StevenHickson/PiAUISuite.git

cd PiAUISuite/Install/
./InstallAUISuite.sh

Update Instructions 

cd PiAUISuite

git pull

cd Install

sudo ./UpdateAUISuite.sh

Demonstration:

So this is a quick video to demonstrate youtube working fast and easily on the Raspberry Pi without the use of XBMC or gnash.
I tried out gnash first which didn't work at all.
So then I tried out XBMC and although it is pretty, it is awfully slow so I decided to get youtube to work on my own.
The basis of this is really simple. There is a nifty program out there called youtube-dl that can get the media file from the website and download it. It's great because it does it fast and works for many other websites like the daily show and the colbert report.
So what I did was basically write a little script that analyzes your input and then gets the proper information from the youtube-dl program without downloading the video, then it sends this http stream to omxplayer to play.
It can handle playlists or individual files from multiple websites as well as a bunch of other things.

After that, I started implementing a nice little search feature using C++ and Curl.
I'm starting to implement a GUI which will essentially look like youtube kind of. Until then I have this nifty search tool, which was essentially my start to the GUI I am currently creating.

If you've ever used XBMC's youtube, you will notice that this is a lot faster, and in my opinion, easier to use and more natural. Plus it only requires a tiny file on your system as opposed to XBMC's massive footprint.

The nice part of having an easy command line program like this is that it can be incorporated into a lot of other things easily. For instance, I have incorporated it into my voicecommand script as shown in the video.

The source code can be found here. To install see the top.

Sources:
This post for using axel with the youtube-dl.
This page for the youtube-dl source and documentation.

 Consider donating to further my tinkering

Places you can find me

• Facebook
• Google+
• Linkedin
• Blogspot
• Google-Code
• Github
• YouTube
• Twitter

Read More

How to fix Raspberry Pi boot problems

If you have any problems with your SD card messing up or your Pi not booting, this is an attempt at documenting my issues with booting or SD card corruption and how I fixed them.

This can range from problems with rpi-update to changing the /boot/config.txt file to restoring the SD card superblocks from the superblock backup to Oh No my SD card is hosed and I need to recover files. We've all been there so need to be embarrassed about messing something up. Things mess up a lot.

Boot Problems

First of all, this is a great reference that I use a lot.

Start by figuring out what changed.

• Did you just change your /boot/config.txt?
• Did you delete any important files?
• Did you run rpi-update?
• Did you add a new device?
• Did you overclock too much?
• Do you get a kbd prompt?
• Did it run some weird commands on the shutdown about "device still open for writing"?

If you just changed your config.txt, you should change it back and then change line by line while rebooting until you see what option is causing the error.

If you deleted any files, restore them.

If you ran rpi-update and it won't reboot, try making your /boot/config.txt the default one. The cma_lwm and cma_hwm options sometimes cause the new firmware to break.
If that doesn't work or you have flashing light errors, restore the old boot files by copying the /boot.bak/ files into /boot/
sudo cp -ap /boot.bak/* /boot/

If you recently overclocked, try reducing it back down. I run 1100 MHz easily but 1200 MHz tends to be unstable for me.

If you get a kbd prompt or error, check your power supply to make sure its supplying enough voltage, then reduce any overclocking or overvolting in your config.txt, then (if the first two don't solve it) replace the boot files like described above.

If you have a kbd prompt that you couldn't fix, you get read/write or I/O errors on shutdown or startup, or 

it can't find the ext4 partition, then you have been a victim of SD card corruption.
Don't worry though. There are still ways to recover your files.

The first thing you should do is make a copy of your SD card image.
Plug the card into another computer with linux and use dd to copy the image. Then you can try to fix the image file without further corrupting the data.
The first thing to try to do is replace your superblock with a backup. To do that click here.
If that doesn't work and all else fails, it is possible to use scalpel and custom recovery configuration to get your files. See here for how to do that.

Consider donating to further my tinkering

Places you can find me

• Facebook
• Google+
• Linkedin
• Blogspot
• Google-Code
• Github
• YouTube
• Twitter

Read More

How to recover any file from corrupted or broken HDs, SSDs, or SD cards

A couple weeks ago, I lost a Raspberry Pi SD card to corruption that didn't even have backup superblocks to restore. There seemed to be nothing to do about it since I couldn't mount it. Restoring the system wasn't a big deal. However, I really wanted some of the cpp, h, js, php, sh, and other files that I had changed a good bit but hadn't yet backed up or committed. Sure we all back up and/or use git/svn but we have to remember Murphy's Law.

This is a guide on how to easily recover those files that you really want but hadn't backed up.

Needed packages

To do this, we are going to use scalpel, xxd, diff, and grep (So we are most definitely using Linux)

You will already most likely have xxd, diff, and grep on your system. To install scalpel, run:
sudo apt-get install scalpel
or yum or pacman or whatever package manager you use.

**Note: It is probably a good idea to make an image of the drive and use scalpel on that if you are able.

Editing Scalpel configuration

The default scalpel configuration file is located at /etc/scalpel.conf

All you need to do is comment out the file types you don't care about and add the filetypes you do care about that aren't in there.

To create custom scalpel configurations, we will use a little bit of common sense and xxd as a hex dumper.

Find a different file with the same file type or an older copy of the file you want and run the following command:

xxd -l 0x04 filename.type; xxd -s -0x04 filename.type

This will get the first 4 and last 4 bytes of the file. Which should be enough to make the filetype unique, though you can change this as needed. You should see a pattern with a lot of files.
For instance, my sh files (the ones I wrote) often start with #!/b and end with sac. or fi..
and my cpp files often start with #inc or // and end with }.
Now we will take these hex patterns, reformat them as \x?? and put them into the scalpel.conf.
You should use REVERSE whenever the file may continue multiple instances of the end statement. You may also need to increase the file size from 50000 to something much bigger for larger files.

Here are some of my custom scalpel configurations:

php         y        50000    \x3c\x3f\x70\x68\x70        \x3f\x3e REVERSE
js y 50000 \x3c\x73\x63\x72\x69\x70\x74\x20\x74\x79\x70\x65\x3d\x22\x74\x65\x78\x74\x2f\x6a\x61\x76\x61\x73\x63\x72\x69\x70\x74\x22\x3e \x3c\x2f\x73\x63\x72\x69\x70\x74\x3e 
cpp        y        50000   \x23\x69\x6e\x63              \x7d\x2e  REVERSE      
cpp        y        50000   \x2f\x2f\x20                      \x7d\x2e             REVERSE
h            y        50000   \x23\x69\x66\x6e              \x64\x69\x66 REVERSE
sh           y        50000   \x23\x21\x2f\x62              \x73\x61\x63 REVERSE

Running Scalpel

Once your scalpel configuration is finished, you need to start extracting the files. This will probably take a while and will get a lot of files (multiple copies of each that match on your system). It won't know the filename or newest version but we will look at that later. You can run scalpel with the following command:

scalpel -c /etc/scalpel.conf yourcopy.img -o output

or the following if you didn't make a copy of your HDD (you will have to specify the appropriate drive and partition number).

scalpel -c /etc/scalpel.conf /dev/sdx# -o output

Once everything is finished it will be in the output folder and we can look for the newest version of your file.

Finding your files

cd into the output directory and you can see all the different filetypes organized.

cd output; ls

For all your graphical file types, i.e. videos and pictures, they should all be listed there and you will have to rename them. 

For your other files, we can use grep recursively to find our newest version. This unfortunately requires you to remember things. It is a good idea to use a function or variable name that you used in order to find your files. Ex:

grep -R "playing()" ./

Searches for the function playing in all your files, this could give you matches in js, php, cpp, c, or h files.

grep -R "::CurlWriter" ./cpp*

Searches for the definition of CurlWriter in all of the cpp files

grep -R "VoiceCommand" ./h*

Searches for the variable or function VoiceCommand in all of your header (h files)

These will probably give you a couple of different results. In my case, these were all different versions of my file. This is a really good chance to use diff. All you have to do is select two of the files and diff to see the differences. Ex:

diff ./sh-5-1/00135386.sh ./sh-5-1/00135393.sh

Once you start getting used to this, you will be better about searching for the newest function or variable name you remember. Once you narrow it down to the newest copy of your file, you can move it elsewhere.

Ex:

mv ./sh-5-1/00135393.sh ~/ImportantFile.sh

There it is, this should allow you to recover almost any file you have created from a corrupted or bad HD, SSD, or SD card.

Places you can find me

• Facebook
• Google+
• Linkedin
• Blogspot
• Google-Code
• Github
• YouTube
• Twitter

Read More

Block Facebook On Your Computer In Few Simple Steps

I had previously posted about Blocking Facebook on your computer but many users were facing difficulties doing that. So In this tutorial i will share with you guys an amazing programme or small little tool that will allow you block facebook on your computer easily in just few simple steps. So lets get started

How To Use Facebook Blocker ? 

 1. First download Facebook Blocker by Clicking Here
  2. Extract the file and right click on Facebook Blocker.exe and run it as administator (Important)
  3. Press 1 in order to  backup your host file to be on the safe side.

  4. Now Press 2 to block facebook
  5. Its time to check if facebook is blocked or not to do that Press 5
  6. Hope this help you if you have any question leave a comment below.

More Computer Tricks & Tips

• Finding Ip Address Of A Website Using CMD
• Trick To Find Facebook Profile ID
• Top 5 Cool Notepad Tricks

Read More